This Part 2 of our project build. My Doraemon decals have arrived and now the spray painting continues. We chose our theme based around the Anime character Doraemon because of the blue and white colors, which I think is a perfect match.
Read Part 1 of our Project MakeMeCooler Doraemon here.
The Doraemon decals
These decals are not your ordinary stickers … they are designed to used on cars and therefore should be more robust (weatherproof). I had to place a special order from a company in Singapore.
The spay painting continues
After deciding not to cut the solid metal side panel due to limited tools and space, we continued the spay painting. Blue and white is the theme we used for our project.
To make the side panel less bland and more interesting, we added added some hexagonal dots using a template we purchased. After the spray painting was complete, we finished it off with some high gloss lacquer/coating.
Adding the Decals and Front Panel LEDs
Once the side and front panels are fully dried off, it’s time to carefully stick our Doraemon Decals.
To give it that extra special look, we added some blue LEDs around the Cooler Master badge, which fitted in the six holes we previously drilled using a Dremel.
Adding the LED strips
Next, to beef-up the inside of the chassis, we added and test fitted the LED strips. All looking good.
The Finished Chassis
Now that the chassis is complete, let’s take a closer look at it from all angles.
Watch out for Part 3, where we will finish the project build by adding the rest of the components which include the motherboard, CPU, CPU water block, RAM, SSD, and of course the hard tubing, which will complete the water loop.
Related articles:
Read Part 1 of our Project MakeMeCooler Doraemon here.
發表迴響